User's Manual

802.11g Mini PCI WLAN Card User’s Manual
58
• If in Ad Hoc mode, make sure the Log on to Windows NT domain check box is not
selected in the Client for Microsoft Networks Properties dialog box in the Network
Configuration tab.
• Incorrect IP address or subnet mask. Check these settings in the TCP/IP Properties
dialog box in the Network Configuration tab.
Poor Link Quality
If the link quality display stays in the poor range, it could be due to one of the following
reasons:
• Radio interference.
• Possible sources of interference can be microwave ovens, cordless phones or pager
systems. Identify and eliminate the source of interference. Move your device closer to
your target Access Point or wireless station.
• Distance between Wireless LAN Card and Access Point is too far. Decrease the
distance between the Access Point or another wireless adapter.
Cannot Connect to an Access Point
If you cannot make a connection to an Access Point, it could be due to one of the following
reasons: