Service Manual

SPECIFICATIONS
TRANSMISSION: Eaton Model 11; Radial, Ball-piston
Displacement:
Pump and Motor with Auxiliary Charge Pump.
Pump, Variable
0-1.10 cu. in/rev.
Motor, Fixed. 2.09 cu. in./rev.
Input 3400
RMP
Torque Output (Max.)
Speed (as used):
Output 0-1750
RPM
Continuous 360 in. Ibs.
Intermittent
540 in. Ibs.
Maximum Continuous 18OoF
8” Diameter Fan Plus Oil Flow From Charge Pump
10 Micron, Full-flow, Spin-on Type
3.8 GPM Free Flow
1.4 GPM @ 700 PSI
Operating Temperature:
Cooling:
Oil Filter (as used)
Charge Pump (3400
RPM Input)
TRANSAXLE: Wheel Horse; Single-speed, with Uni-
Drive 8-pinion Differential and Double Reduction
Gears.
Heat-Treated Steel
Ball
2
Needle 6
Cast Iron
3, Double-lip, Spring-loaded
Drive Belt Pulley Ratio
1:l
Overall Reduction Ratio 15.64:l
Axle Shaft Speed:
@ 1750 RPM Eaton Output 112 RPM
Tractor Speeds (approx.):
Forward 0-7 MPH
Reverse 0-4.2 MPH
Gears and Shafts
Bearings:
Case Halves and Hubs:
Seals:
Ratios and Speeds:
MAINTENANCE:
Oil Check Before Each Use
Replace
Oil and Filter:
Initial After First
100 Hours of Use
Periodic Once a Year, or After Every 100 Hours
Oil Specification
Oil Capacity (approx.)
5 quarts
Oil Filter Wheel Horse 108335
Adjustments
of Use, Whichever Occurs
First
1OW-30 or 1OW-40 Premium Motor Oil
Foot/Parking Brake
Motion Control Friction
As Required
Motion Control Neutral
Torque Value (Thread Sizes)
1/4-20 8
ft. Ibs.
5/16-18 17-22 ft. Ibs.
3/8-16 30-35 ft. Ibs.
1/2-135-13 75-80 ft. Ibs.
Wheel Hub Set Screw 28-32
ft. Ibs.