Installation Instructions

Installation
EN–3
Remove Cable Ties
1. Cut cable ties holding cables to lower handle.
Remove Gas Tank
1. Disconnect fuel line from engine (Fig. 2).
2. Remove gas tank from tank bracket (Fig. 2).
Carefully set tank aside.
1
3
2
4
Figure 2
1. Fuel line clamp
2. Fuel line
3. Tank bracket
4. Gas tank
Disconnect Throttle Cable
1. Remove (2) self-tapping screws securing belt
cover to deck (Fig. 3). Set cover and fasteners
aside for reinstallation.
m-224



Figure 3
1. Belt cover 2. Self-tapping screw (2)
2. Loosen cable clamp screw and disconnect
throttle cable from throttle lever (Fig. 4).
m-286



Figure 4
1. Cable clamp screw
2. Throttle cable
3. Throttle lever