Service Manual

CHASSIS

3-41Toro GrandStand Service Manual

7. Repeat steps 4 through 6 on the other side if re-

placing both gas spring assemblies.

8. Loosen the lower lock nut on the lift bar 1/2 turn (Fig.

0151 and Fig. 0152).

9. Spin the upper nut approximately 1/2” (1.27cm) up

the lift bar (Fig. 0153).

Fig. 0151 IMG-9705a

Fig. 0152 IMG-0088a

Fig. 0153 IMG-9749a

10. Tighten the lower nut on the lift bar until the com-

pression force on the gas spring assembly has been

relieved and the gas spring assembly can easily be

removed from the ball stud (Fig. 0154).

Fig. 0154 IMG-9709a