Service Manual

ELECTRICAL

8-33Toro GrandStand Service Manual

Solenoid Removal

1. Disconnect the black ground cable from the battery

(Fig. 1529).

3. Remove the nut and lock washer securing the

positive cable that goes to the starter (Fig. 1531).

Fig. 1529 IMG-1287a

2. Move the terminal cover off the positive cable com-

ing from the battery, then remove the nut and lock

washer securing the positive battery cable and red

wire eyelet (Fig. 1530).

Fig. 1530 IMG-1289a

Fig. 1531 IMG-1294a

4. Remove the green and blue bullet connectors from

the two small studs on the solenoid (Fig. 1532).

Fig. 1532 IMG-1295a