Service Manual

HYDRAULIC DRIVE SYSTEM
6-5Toro GrandStand Service Manual
6
3. Remove the idler spring from the idler plate (Fig.
0917).
5. Remove the bolt and nut securing the idler assembly
to the engine base, then remove the assembly (Fig.
0919).
A. Steel washer C. Bushing
B. Friction composite D. Idler plate
washer (2) E. Large spacer
Fig. 0917 IMG-0804a
4. Remove the belt from around the pump and idler
pulleys (Fig. 0918).
Fig. 0918 IMG-0805a
Fig. 0919 IMG-0806a
6. Remove the large spacer, two friction composite
washers, spacer and washer (Fig. 0920).
Fig. 0920 IMG-0808a
A B
C
D
B
E