Service Manual

CONTROLS
4-15Toro GrandStand Service Manual
4
RH Control Linkage Installation
1. Secure the pump control arm to the pump RTN
mechanism using two bolts and nuts (Fig. 0684).
3. Position the control fork on the shoulder hub with
the forked end straddling the pump control arm (Fig.
0686).
Fig. 0684 IMG-1018a
2. Position the shoulder hub into the two neutral switch
levers (Fig. 0685).
Fig. 0685 IMG-1019a
Fig. 0686 IMG-1041a
4. Install the bolt with washer through the center of the
shoulder hub (Fig. 0687).
Fig. 0687 IMG-1015a