Operator's Manual

13
Operation
Note: Determine the left and right sides of the machine
from the normal operating position.
Rotating tines can cut hands, feet or other body
parts.
• Keep away from the rotating tines while
operating the tiller.
• Keep your hands, feet, and any other part of
your body or clothing away from rotating
parts.
• Before adjusting, cleaning, repairing and
inspecting the tiller, lower the tiller and loader
arms to the ground and turn off the engine.
Remove the key.
Warning
Operating the
Power Take Off (PTO)
The power take off (PTO) switch engages and disengages
power to the electric clutch.
The PTO light, in the Indicator Module, will be on when
the ignition key is in run or the lights position and the
power take off (PTO) is engaged. When this light is on, it
is a reminder the starter will not crank and to turn the off
PTO before getting off the tractor.
Engaging the Power Take Off (PTO)
1. Move the throttle to the fast position.
2. Pull the power take off (PTO) to the on position
(Fig. 29).
1
2
m–6524
Figure 29
1. PTO—Off 2. PTO—On
Disengaging the Power Take Off (PTO)
1. Push the power take off (PTO) to the off position
(Fig. 29).
Using the Attachment Power
Lift
The attachment power lift (Fig. 30) is used to raise and
lower attachments.
Raising Attachments
1. Turn key to the on or run position (Fig. 30).
2. Push the lift switch in the up direction to raise the
attachment lift (Fig. 30). This will lift and hold the
attachment in the up, or raised position.
Lowering Attachments
1. Turn key to the on or run position (Fig. 30).
2. Push the lift switch in the down direction to lower the
attachment lift (Fig. 30). This will lower the
attachment lift.
m–6513
2
3
1
Figure 30
1. Key
2. Lift switch —up
3. Lift switch —down