Operator's Manual

Operation

POTENTIAL

HAZARD

• Hitting fixed objects can cause the tractor

to stop abruptly.

WHAT CAN HAPPEN

• Stopping abruptly can cause loss of control,

equipment damage and personal injury.

HOW TO AV

OID THE HAZARD

• Travel at a safe, slow speed.

• Check area to be plowed and mark all fixed

objects so they can be avoided.

Adjusting

Dial-A-Height

The Dial-A-Height control (Fig. 11) is used to limit

the downward travel of the attachment. The

Dial-A-Height knob is rotated to change the location

of this stop, up or down.

1. Raise the attachment lift lever: Refer to Raising

Attachments. In the raised position the

Dial-A-Height knob (Fig. 11) can be rotated to

change the stop location. Turn clockwise to raise

and counterclockwise to lower the height of the

attachment.

Attachment

Lift Lever

The attachment lift lever (Fig. 11) is used to raise and

lower various attachments.

Raising Attachments

1. Pull attachment lift lever rearward until latch

locks. In this position the lift will hold the

attachment in the up, or raised position.

Lowering Attachments

1. Pull attachment lift lever rearward, to release lift

pressure, and push the button on top to release

the latch. Move lift lever forward to lower

attachment.

m–2514

Figure 1

1. Lift

lever

2. Button

3. Dial-A-Height