Use and Care Manual

g201215
Figure13
1.Nut3.Bolt
2.Existinghitchbracket
2.Installthestabilizerbrackettotheengineguardusing2
carriagebolts(5/16x3/4inch)and2locknuts(5/16
inch)asshowninFigure14.
g030494
g030494
Figure14
1.Stabilizerbracket3.Locknut(5/16inch)
2.Carriagebolt(5/16x3/4
inch)
3.Removetheexisting2self-tappingscrewsfromthe
bottomofthemachineframe(Figure16).
4.Looselyinstallthepivotframetothemachineframe
using2bolts(5/16x1inch)and2locknuts(5/16inch)
asshowninFigure15.
g201214
Figure15
1.Machineframe4.Bolt(5/16x1inch)
2.Locknut(5/16inch)5.Pivotframe
3.Hole
5.Positionthepivotframeupward,andsecurethepivot
frametothebottomofthemachineframeusing2
self-tappingscrews(5/16x3/4inch)asshownin
Figure16.
g028174
Figure16
1.Self-tappingscrew(5/16x
3/4inch)
2.Pivotframe
6.Tightenthe2bolts(5/16x1inch)and2locknuts
(5/16inch)asshowninFigure15.
7.Installthebent,aredendofarodintothekeyedslot
intheleftsideofthemachineframe,andmovetherod
rearwardtoseatitintheframe(Figure17).
Note:Repeatthisstepfortherightsideofthe
machine.
11