Installation Instructions
Table Of Contents
- .
- 1 Preparing the Mower
- 2 Removing the Existing Belt Cover and the Discharge Chute
- 3 Drilling the Baffle Hole
- 4 Removing the Bracket for the Belt Cover
- 5 Installing the Baffle and Blower Support for 48 inch Mower Decks
- 6 Installing the Baffle and Blower Support for 54 inch Mower Decks
- 7 Installing the Baffle and Blower Support for 60 inch Mower Decks
- 8 Installing the Pulley Assembly, Metal Belt Cover, and Shoulder Bolt
- 9 Installing the Blower Assembly, Bagger Belt, Spring, and Plastic Belt Cover
forthecorrectpositionoftheblowersupportandthe
existingcutoffbafe.
4.Usingtheverticalstudinthebafe,installtheblower
supporttothemowerdeckwithaangenut(5/16
inch)(Figure4).
g021007
2
3
5
1
4
1
6
5
Figure4
1.Flangenut(5/16inch)4.Bafe
2.Blowersupport
5.Bolt(5/16x1inch)
3.Mowerdeck
6.Existingcutoffbafe
6
InstallingtheBafeand
BlowerSupportfor54inch
MowerDecks
Partsneededforthisprocedure:
1Blowersupport
1
Largebafe
1
Smallbafe
3
Bolt(5/16x1inch)
5
Flangenut(5/16inch)
Procedure
Thisprocedureisfor54inchmowerdecksonly.
1.Alignthelargebafesothebafestudsgothroughthe
frontandtopmowerdeckholes.
2.Installthelargebafetothefrontofthemowerdeck
withaangenut(5/16inch)(Figure5).
3.Installtheblowersupportandexistingcutoffbafe
tothemowerdeckwith3bolts(5/16x1inch)and
3angenuts(5/16inch).RefertoFigure5forthe
correctpositionoftheblowersupportandtheexisting
cutoffbafe.
4.Usingtheverticalstudinthelargebafe,installthe
bafeandblowersupportofthemowerdeckwitha
angenut(5/16inch)(Figure5).
5.Usingtheexistingnutandbolt,looselyinstallthesmall
bafetothemowerdeck(Figure5).
6.Rotatethesmallbafeuntilittouchesthelargebafe
andthefrontofthemowerdeck.
7.Tightentheexistingnutandbolt.
4