Operator's Manual

Installation
8
1
3
1246a
2
Figure 14
1. Release button
2. Front hitch
3. Lift arm
7. Remove hairpin cotter and control rod from
index lever (Fig. 15).
8. Remove the index handle pivot bolt and locking
nut. Unhook the ”Z” hook from the triangular
plate. Remove the index handle. Save nounting
hardware for reinstallation.
9. Slide the blade out between front wheels of the
tractor.
m–4519
1
2
3
4
5
6
Figure 15
1. Index handle
2. Hairpin cotter
3. Control rod
4. Locking nut
5. Handle pivot bolt
6. ”Z” hook
10. Remove the steering spindle stops, from tabs on
front wheel spindles, to allow for tighter turning
radius (Fig. 16).
Note: Save all hardware, rods, washers and
hairpin cotters for reuse when
reinstalling the snow blade.
1471
1
2
3
4
Figure 16
1. Steering wheel stop
2. Self tapping bolt
5/16 x 3/4”
3. Spindle stop
4. Tire