Operator's Manual

Important:Youmayhavetolifttheblower
slightlyforthelatchtoclose.Ensurethatthe
latchoperates smoothl y andcloses completel y .
Figure9
1.Blowerlatch2.Pin
6
InstallingtheBeltCovers
Partsneededforthisprocedure:
1Beltcoverbracket
3
Screw(1/4x3/8inch)
1Mowerbeltcover
2
Screw(1/4x1/2inch)
1Blowerbeltcover
2
Bolt(1/4x5/8inch)
2
Locknut(1/4inch)
Procedure
1.Attachthebeltcoverbrackettothemowerdeckwith
two(1/4x3/8inch)screws(Figure10).
2.Attachthefrontofthemowerbeltcoverloosely
tothebeltcoverbracketwithtwo(1/4x1/2inch)
screws.Attachthebackofthemowerbeltcover
looselytothemowerdeckwitha(1/4x3/8inch)
screw(Figure10).
Note:Donottightenthescrewsasadjustment
mustbemadelater.
Figure10
1.Beltcoverbracket3.Mowerbeltcover
2.Screw(1/4x3/8inch)4.Screw(1/4x1/2inch)
3.Mounttheblowerbeltcoverusingtwo(1/4x5/8
inch)boltsandtwo(1/4inch)locknuts(Figure11).
Tightenthelocknutsslightlysolightdragisfelton
thebeltcoverwhenitistiltedupward.Thecover
mustclosefreelywhenassembled.
Figure11
1.Blowerbeltcover
3.Locknut,1/4inch
2.Bolt,1/4x5/8inch
4.Mowerbeltcover
4.Adjustthemowerbeltcoverbyslidingitsothe
blowerbeltcoverjusttouchestheblower,but
stillopensfreely.Tightenthemowerbeltcover
mountingscrews.
9