Operator's Manual

14
3. Remove the blower by lifting the pivot pin out of the
pivot support (Fig. 28).
1
2
m–3593
Figure 28
1. Pivot pin 2. Pivot support
Removing the Blower Belt
1. Remove the mower belt cover from the right side pulley
(Fig. 29). Save the mounting hardware.
2. Unhook the blower belt from the blower pulley
(Fig. 29).
2
3
1
4
m–5306
5
Figure 29
1. Belt cover
2. Blower belt
3. Blower pulley
4. Screw (existing)
5. Screw, 1/4 x 1/2 in.
3. Install the old belt cover using the existing hardware
(Fig. 30).
1
2
m–5304
Figure 30
1. Belt cover 2. Screw (existing)
Removing the Blower Pivot Support
1. Remove the mower from the tractor; refer to the tractor
Operator’s Manual for instructions.
2. Remove the pivot support and pivot bracket from the
mower (Fig. 31). Retain all parts for future installation.
4
2
m–2017
1
5
3
5
7
6
Figure 31
1. Pivot support
2. Carriage bolt, 5/16 x
4-1/2 in.
3. Spacer tube
4. Carriage bolt, 5/16 x
7/8 in.
5. Locknut, 5/16 in.
6. Washer, 5/16 in.
7. Pivot bracket