Installation Instructions

1
AssemblingtheZStand
®
Hub
Partsneededforthisprocedure:
1
ZStandhub
1Latchbracket
1
Bolt(3/8x1-1/2inches)
1
Flangenut(3/8inch)
Procedure
1.Parkonalevelsurface,disengagethePTO,setthe
parkingbrake,removethekeyandchockorblockthe
drivewheels.
2.Turnofftheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.InstallthebracketlatchtotheZStandhubwitha
bolt(3/8x1-1/2inches)andaangenut(3/8inch)
(
Figure1).
4.Tightenthenutandbolt.Then,unscrewitonefull
turnoruntilthelatchwillfreelyrotate(Figure1).
Figure1
48,52and60inchshown
1.Flangenut(3/8inch)
3.Bracketlatch
2.ZStandhub4.Bolt(3/8x1-1/2inches)
2
InstallingtheZStandHub
Partsneededforthisprocedure:
4
Carriagebolt(3/8x1-1/4inches)(48,52and60inch
machines)
4
Flangenut(3/8inch)(48,52and60inchmachines)
6
Carriagebolt(3/8x1-1/4inches)(72inchmachines)
6
Flangenut(3/8inch)(72inchmachines)
1Bracket
1
Anglebracket(72inchmachines)
Procedure
1.PlacetheZStandhubontherightfrontframeas
showninFigure2.
2.For48,52and60inchmowers,installtheZStand
hubtotheframewiththebottombracket,4carriage
bolts(3/8x1-1/4inches)and4angenuts(3/8
inch)(Figure2).
3.For72inchmowers,installtheZStandhubtothe
framewiththebottombracket,theanglebracket,6
carriagebolts(3/8x1-1/4inches)and6angenuts
(3/8inch)(Figure2andFigure3).
3