Installation Instructions

3
InstallingthePulleyandIdler
Assemblies
Partsneededforthisprocedure:
1Blowermount
1
Bolt(1/2x1-1/2inches)
1Lockwasher
1
Nut(1/2inch)
1
Bolt(3/8x1-1/4inches)
1
Nut(3/8inch)
1
Carriagebolt(3/8x1-1/4inches)
1
Carriagebolt(3/8x1inch)
1Idlerassembly
1Pulleyassembly
Procedure
1.Installtheblowermounttothedeckusing1bolt(1/2
x1-1/2inches),1lockwasher,1nut(1/2inch),1bolt
(3/8x1-1/4inches),and1nut(3/8inch)asshown
inFigure3.
Note:Youmayneedtoloosenthe3bafeboltswhen
youinstalltheblowermounttoaligntheassemblywith
thedeck.Tightentheboltsafterinstallingthemount.
g194670
Figure3
1.Nut(3/8inch)5.Bolt(1/2x1-1/2inches)
2.Blowermount6.Lockwasher
3.Bolt(3/8x1-1/4inches)7.Nut(1/2inch)
4.Bafebolt(3)
2.Removethenutsfromthespindleintherightdeck
pulleyandusethemtoattachthepulleyassemblyto
thedeckpulley(Figure3).
Note:Youmayneedtoremovethemowerbeltto
relievethetensionoffthedeckpulleywhenyouinstall
thepulleyassembly.RefertotheOperator’sManualfor
themachine.
g037507
Figure4
1.Nut
3.Spindle
2.Pulleyassembly
3.Usingthe3nutsthatyouremovedpreviously,1
carriagebolt(3/8x1-1/4inches),and2carriagebolts
(3/8x1inch),installtheidlerassemblytothemower
deck(Figure4).
5