Installation Instructions

ForMachineswithBolts
1.Loosen,butdonotremove,thetappingboltson
theexistingmower-deckpulley(Figure9).
Note:Thereshouldbea5mm(3/16inch)
clearancebetweentheboltheadandpulley.
2.Alignthenewpulleyassemblysothatthe
openingstoverthepulleyboltheads(Figure9).
3.Turnthepulleytolockitintoposition(Figure9).
Note:Ifthepulleydoesnotturn,loosenthe
boltsmoretoraisetheboltheadsandallowthe
pulleytolockintoposition.
4.Afterthenewpulleyassemblyisinposition,
tightentheexistingboltstosecurenewpulley
assembly.
Note:Torquetheboltsto28to34N∙m(21to
25ft-lb).
g003396
Figure9
1.Pulley
assembly
3.Lockingslots
5.Clearance—5
mm(3/16inch)
2.Mower-deck
pulley
4.Boltheads
5.Installthedeckbelt.
ForMachineswithoutBolts
1.Removethenutsontheexistingmower-deck
pulley(Figure10).
2.Installthenewpulleyassemblyontothe
mower-deckpulleybolts(Figure10).
3.Turnthepulleytolockitintoposition(Figure10).
4.Afterthenewpulleyassemblyisinposition,
installthenutstosecurenewpulleyassembly.
Note:T orquethenutsto28to34N∙m(21to
25ft-lb).
g017234
Figure10
1.Pulley
assembly
2.Mower-deck
pulley
3.Locking
slots
4.Nuts
5.Installthedeckbelt.
6