Installation Instructions

2. Install the larg e R-clamp to the outside of the

mo w er dec k and g aug e wheel brac k et with a

bolt (3/8 x 1 inc h) and new loc kn ut ( Figure 5 ).

Figure 5

1. Right rear gauge wheel and

bracket

4. Bolt, (5/16 x 1 inch)

2. Large R-clamp 5. Cables

3. Locknut, (5/16 inch)

3. F or mo w er dec ks with a pi v ot tube , secure the

cables with a plastic cable tie ( Figure 6 ).

Figure 6

1. Plastic cable tie 3. Pivot tube

2. Cables

4. F or 48 inc h mo w ers , install the small R-clamp

to the mo w er dec k with a bolt (5/16 x 3/4

inc h) and loc kn ut (5/16 inc h) using the existing

hole in the right rear top of the dec k ( Figure 7 ).

Figure 7

1. Small R-clamp

3. Locknut, (5/16 inch)

2. Existing hole in mower

deck

4. Bolt, (5/16 x 3/4 inch)

5. F or all other mo w ers , install the adhesi v e bac k

plastic mount on a smooth clean surface .

T hread the cable tie through the plastic mount

and secure the cables with the cable tie ( Figure

8 ).

Figure 8

1. Plastic cable tie 3. Plastic mount

2. Cables