Operator's Manual

13
Operation
Side Discharge Operation
The mower has a hinged discharge chute that
disperses clippings to the side and down toward the
turf.
POTENTIAL HAZARD
· Without the discharge chute, mulch baffle,
or complete grass catcher assembly
mounted in place, you and others are
exposed to blade contact and thrown
debris.
WHAT CAN HAPPEN
· Contact with rotating mower blade(s) and
thrown debris will cause injury or death.
HOW TO AVOID THE HAZARD
· NEVER remove the discharge chute from
the mower because the discharge chute
routes material down toward the turf. If the
discharge chute is ever damaged, replace it
immediately.
· Never put your hands or feet under the
mower.
· Never try to clear the discharge area or
mower blades unless you move the power
take off (PTO) to “OFF” and rotate the
ignition key to “STOP.” Also remove the
ignition key and pull the wire(s) off the
spark plug(s).
Operating the Power Take Off
(PTO)
The power take off (PTO) engages and disengages
power to the electric clutch.
While the ignition key is in RUN or LIGHTS
position and the power take off (PTO) is engaged, the
PTO indicator light will be on. When this light is ON,
it is a reminder: the implement is being powered and
the starter will not crank while the PTO is engaged.
Always turn off the PTO before getting off the seat.
Engaging the Power Take Off (PTO)
1. Depress the brake pedal to stop the machine.
2. Move the throttle lever to FAST.
IMPORTANT: For best performance, always
use full throttle when the power take off
(PTO) switch is ON.
3. Pull the power take off (PTO) switch to ON (Fig.
24).
m--3264
1
2
Figure 24
1. Push (off-disengaged) 2. Pull (on-engaged)
Disengaging the Power Take Off (PTO)
1. Push the power take off (PTO) switch to OFF.