Operator's Manual

Installation
6
m--3456
1
2
Figure 6
Left Side of Tractor Shown
1. J--pin 2. Mower slot in side
mounting bracket.
8. After the two J--pins are seated through the
mower’s mounting brackets, using the
attachment lift and your hand on the right front
adjustable mower wheel bracket (Fig. 7),
position the mower so its attachment bar fits into
the mid Attach--A--Matict mount.
POTENTIAL HAZARD
· The “scissor” formed by the mower
mounting brackets and the attachment lift
arm is dangerous.
WHAT CAN HAPPEN
· Hands and fingers can get caught between
the mower parts and the tractor and be
injured.
HOW TO AVOID THE HAZARD
· Keep hands away from moving parts while
operating the attachment lift.
· Always position the mower with your hand
on the right front mower wheel bracket.
· Never try to position the mower with your
hands on the mower mounting brackets or
below the mower housing.
m--3500
1
Figure 7
1. Place hand here
9. Turn the lever of the Attach--A--Matict
counterclockwise to lock the mower to the
tractor (Fig. 8).
m--3611
1
2
3
Figure 8
1. Attach-A-Matic
TM
button
2. Attach-A-Matic
TM
lever
3. Lock
10. Set the parking brake, lower the attachment lift,
stop the engine, and remove the ignition key.
Attach the PTO Drive Belt
1. Hang the belt over the mower, then thread it
forward through the belt guide (Fig. 9) on the
mower.