Operator's Manual

Installation
8
6. To adjust front-to rear blade level loosen jam nut
on front adjustable link. (Fig. 12).
7. Rotate the bolt on front adjustable link to change
front-to rear blade level (Fig. 12).
Note: To raise the front of the mower,
shorten the adjustable link by turning
bolt clockwise.
1
2
3
1227
Figure 12
1. Adjustable link
2. Jam nut
3. Bolt
8. When front-to-rear slope is correct, tighten jam
nut. Recheck side-to-side mower level; refer to
Side-to-Side Mower Leveling, page 6.
9. Push the wire onto the spark plug(s).