Operator's Manual

Operation
12
Attachment Power Lift
The attachment power lift (on some models) (Fig. 19)
is used to raise and lower attachments.
Raising Attachments
1. Turn key to the “ON” or “RUN” position
(Fig. 19).
2. Push the lift switch in the “UP” direction to raise
the attachment lift (Fig. 19). This will lift and
hold the attachment in the up, or raised position.
Lowering Attachments
1. Turn key to the “ON” or “RUN” position
(Fig. 19).
2. Push the lift switch in the “DOWN” direction to
lower the attachment lift (Fig. 19). This will
lower the attachment lift.
2266
2
1
3
Figure 19
1. Key
2. Lift switch UP
3. Lift switch DOWN
Attachment Lift Lever
The attachment lift lever (on some models) (Fig. 20)
is used to raise and lower attachments.
Raising Attachments
1. Depress the clutch and/or brake pedal(s) to stop
the machine.
2. Pull attachment lift lever rearward until latch
locks. In this position the lift will hold the
attachment in the up, or raised position.
Lowering Attachments
1. Depress the clutch and/or brake pedal(s) to stop
the machine.
2. Pull attachment lift lever rearward, to release lift
pressure, and push the button on top to release
the latch. Move lift lever foreword to lower
attachment.
1205
3
2
4
5
6
1
Figure 20
1. Lift lever
2. Button
3. Dial-A-Height
4. Indicator
5. High
6. Mounting position