Service Manual

36 ZT-2800
®
/ZT-3100
®
/ZT-3200
TM
/ZT-3400
®
Figure 32, Center Section Kit (201)
CENTER SECTION KIT
RefertoFigure32
Disassembly
       
center section.
       

 Before removing the check
plugs,itisimportanttonotetheirspecicloca-
tion,i.e.,checkplug(24)needstobereinstalled
inthesameportitwasremovedfromandthe
sameforcheckplug(25).Afterremovingthe
checkplugs,inspectfordebrisordamage.
 

35.

 
    


      


NOTE: Thecheckballshouldseatproperlyin
thecheckseat.
Inspection
 
-


Assembly
 


 

 
 


Center Section — Non-Charge
NOTE: For non-charge ZT-2800
®
units without
“chargerelief,”arubberplug(16)willbe
presentratherthanconnectingtubes(ref.
onpage27,Figure22a).Seediagramto
theright.
26
25
22
24





