Service Manual

ENGINE

4-12 Toro Z Master G3 3000/5000/6000 Series Service Manual

25. Install 3 carriage bolts and nuts retaining the LH

bumper to the frame and rear guard (Fig. 261).

Fig. 261 DSCN-0004a

27. Turn the fuel shut off valve to the “On” position; for

tilt seats, lift the seat; for non-tilt seats, slide the seat

forward to access the fuel shut off valve.

28. Lower the machine to the ground with a oor jack,

after removing the jack stands.

29. Install the battery in the frame. Install the positive

and negative battery cables.

26. Install the 3 carriage bolts and nuts retaining the RH

bumper to the frame and rear guard (Fig. 262).

Fig. 262 DSCN-4637a