Service Manual

ENGINE

4-9Toro Z Master G3 3000/5000/6000 Series Service Manual

11. Plug the clutch wire plug into the electric PTO clutch

(Fig. 249).

Fig. 249 DSCN-0028a

12. Using a 1/2” drive breaker bar installed in the square

hole in the pump idler assembly, rotate the pump

idler arm counter-clockwise to allow room to install

the v-belt around the engine pulley (Fig. 250).

Fig. 250 DSCN-0025a

13. Using a 3/8” breaker bar, install the mower idler arm

assembly and relieve the tension on the idler arm

assembly. Install the mower drive belt around the

electric PTO clutch (Fig. 251).

Fig. 251 DSCN-0020a

14. Install the oor pan.

15. Install the vent line to the air lter assembly (Fig.

252).

Fig. 252 DSCN-0018a