Service Manual

HYDRAULIC SYSTEM

5-28 Toro Z Master G3 3000/5000/6000 Series Service Manual

UHT Transmission Installation (2012 & later

models)

4. On the opposite side, ensure the cradle mounting

holes align with the mounting holes on the UHT

transmission (Fig. 357).

3. Lift the UHT transmission/cradle assembly up to the

frame with a oor jack. On the side of the machine

that was serviced, loosely install two mounting bolts,

coming from the top down, through the frame and

into the UHT transmission (Fig. 356).

Fig. 354 DSCN-4535a

Fig. 356 DSCN-4546a

Fig. 357 DSCN-4539a

1. Using the top two bolts as guides, position the UHT

transmission into the cradle and slide the unit onto

the two bolts (Fig. 354).

Note: Be careful not to damage the UHT transmis-

sion pulley. Make sure the release valve lever

is in the closed (horizontal) position.

2. Loosely install a nut onto each of the bolts securing

the UHT transmission to the cradle (Fig. 355).

Fig. 355 DSCN-4536a