Service Manual

HYDRAULIC SYSTEM

5-3Toro Z Master G3 3000/5000/6000 Series Service Manual

10. Raise the rear of the unit and support it with 2 jack

stands placed under the right and left tie down loops

(Fig. 269).

Note: Tires should be at least 6” (15.2cm) off the

oor.

12. Using a 1/2” drive breaker bar installed in the square

hole in the pump idler assembly, rotate the pump

idler arm counter-clockwise to relieve tension on the

v-belt (Fig. 271).

Fig. 269 PICT-8548

11. Remove the two rear wheels (Fig. 270).

Fig. 270 PICT-8550a

Fig. 271 PICT-8557a

13. With tension removed, remove the v-belt from

around the transmission pulleys and the engine drive

pulley (Fig. 272).

Fig. 272 PICT-8561a