Service Manual

HYDRAULIC SYSTEM

5-2 Toro Z Master G3 3000/5000/6000 Series Service Manual

7. With a 3/8” drive breaker bar installed in the square

hole of the idler bracket, rotate the idler bracket

clockwise to relieve belt tension (Fig. 266).

9. Remove the mower deck drive belt from around the

electric PTO clutch and pull the belt forward so it

clears the hydro cradle assembly (Fig. 268).

8. Remove the mower deck drive belt from the center

mower spindle pulley (Fig. 267).

Fig. 265 PICT-8543

Fig. 266 PICT-8545a

Fig. 267 PICT-8546a

Fig. 268 PICT-8693a

6. Lower the mower deck to the lowest position. Lift the

oor pan up and remove it (Fig. 265).

Note: On international models, unbolt the oor pan.