Service Manual

ENGINE

4-2 Toro Z Master G3 3000/5000/6000 Series Service Manual

7. Loosen the cable clamp and remove the throttle

cable (Fig. 224).

Fig. 224 DSCN-4253a

8. Remove the z-bend end of the cable from the throttle

arm assembly (Fig. 225).

Fig. 225 DSCN-4258a

6. Remove the 2 nuts retaining the rear guard to the

frame and 1 carriage bolt and nut retaining the

mufer guard to the rear guard (Fig. 223).

Fig. 223 DSCN-0012a

5. Remove the 3 carriage bolts and nuts retaining the

LH bumper to the frame and rear guard (Fig. 222).

Fig. 222 DSCN-0004a