Service Manual

HYDRAULIC SYSTEM

5-4 Toro Z Master G3 3000/5000/6000 Series Service Manual

16. On the side of the machine being serviced, remove

the cotter pin securing the castle nut to the wheel

hub (Fig. 275).

Fig. 273 PICT-8563

15. On the side of the machine being serviced, pry the

control arm off the square tapered shaft (Fig. 274).

Note: Be careful to not damage the trunnion shaft

seal.

Fig. 274 PICT-8566

Fig. 275 PICT-8578

17. On the side of the machine being serviced, remove

the castle nut from the wheel hub (Fig. 276).

Fig. 276 PICT-8580

14. On the side of the machine being serviced, remove

the bolt and washer securing the hydro control arm

to the hydro drive control shaft (Fig. 273).