Service Manual

CHASSIS
3-56 Toro Z Master G3 3000/5000/6000 Series Service Manual
3
7. Remove screw, at washer and nut retaining
the front pump linkage to the LH motion control
assembly (Fig. 196).
Fig. 196 DSCN-4470a
9. Remove the pivot hub from the LH motion control
(Fig. 198).
Fig. 198 DSCN-4474a
10. Remove the wire harness anchor from the LH
motion control (Fig. 199).
Fig. 199 DSCN-4475
8. Remove the bolt securing the pivot hub and the LH
motion control to the frame (Fig. 197).
Fig. 197 DSCN-4473a