Service Manual

7-12
Table of Contents
Twin Cylinder Engine Service Manual
February 2017 - Digital Edition
ENGINE DISASSEMBLY
Disassembly Upper End (Cont.)
Flywheel/Screen/Fan
1. Remove the blower shroud (Figure 11) (if not previously removed), see “Engine Shroud,” chapter 7, page
7-7.
2. Remove the four screws retaining the shredder screen and remove the shredder screen.
3. Remove the four bolts retaining the cooling fan and remove the cooling fan.
4. Remove the ywheel bolt and washer.
NOTE: Remove ignition coils if not previously removed, see “Ignition Coils,” chapter 7, page 7-10.
NOTE: When loosening the ywheel bolt, use a strap wrench to hold the ywheel from rotating if needed.
Figure 11