Service Manual

7-7
Table of Contents
Disassembly
Twin Cylinder Engine Service Manual
February 2017 - Digital Edition
ENGINE DISASSEMBLY
Disassembly Upper End (Cont.)
Engine Shroud
a. Blower Shroud Removal
NOTE: The blower shroud is retained with six identical shoulder bolts (Figure 6).
1. Loosen each bolt a few turns.
2. Remove the blower shroud with the fan cover and air lter door attached.
NOTE: Remove the oil drain hose from the shroud if it was reattached after draining the oil.
Figure 6