Operator's Manual

Adjustingthe
Motion-Control
Neutral-LockPivot
Youcanadjusttheangednuttoobtainthedesired
motion-controlleverresistancewhenyoumovethem
totheNEUTRAL-LOCKposition.SeeFigure87for
adjustmentoptions.
1.Loosenthejamnut.
2.Tightenorloosentheangednuttothedesired
feel.
Note:Formoreresistance,tightentheanged
nut.
Note:Forlessresistance,loosentheanged
nut
3.Tightenthejamnut.
g008621
Figure87
1.Flangednut2.Jamnut
HydraulicSystem
Maintenance
ServicingtheHydraulic
System
HydraulicFluidType:Toro
®
HYPR-OIL
™
500
hydraulicuidorMobil
®
115W-50.
Important:Usetheuidspecied.Otheruids
coulddamagethehydraulicsystem.
EachHydraulicSystemFluidCapacity:1.5L(52
oz)persidewithlterchange
CheckingtheHydraulicFluid
ServiceInterval:Every50hours—Checkthe
hydraulic-uidlevel.
1.Positionthemachineonalevelsurface.
2.Disengagetheblade-controlswitch(PTO),move
themotion-controlleverstotheNEUTRAL-LOCK
position,andsettheparkingbrake.
3.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
4.Waitfortheengineandhydraulicsystemtocool
for10minutes.
Note:Theuidlevelonthedipstickisincorrect
ifyouchecktheuidwhenthemachineishot.
5.Movetheseatforward.
6.Cleantheareaaroundthedipsticksofthe
hydraulicsystemreservoirs(Figure88).
7.Remove1dipstickfromthehydraulicreservoir
(Figure88).
8.Wipethedipstickoffandthreadthedipstickinto
thereservoir.
9.Removethedipstickandlookattheend(Figure
88).
Note:Iftheuidlevelisattheaddmark,
slowlypouronlyenoughuidintothehydraulic
reservoirtoraisetheleveltothefullorHline.
Important:Donotoverllthehydraulic
unitswithuid,asdamagemayoccur.Do
notrunthemachinewiththeuidbelowthe
addmark.
10.Installthedipstick.
11.Repeatprocedurefortheoppositedipstick.
62