Service Manual

MOWER DECKS
6-2 Toro Z Master G3 3000/5000/6000 Series Service Manual
6
Mower Belt Installation
Fig. 391 g. 81 G009038
1. Install the new belt around the mower deck pulleys
and the clutch pulley under the engine (Fig. 391).
A. Clutch pulley E. Square hole in the idler
B. Mower belt arm for the ratchet
C. Spring-loaded idler F. Idler grease zerk
pulley G. Belt guide
D. Ratchet
8. Remove the belt guide on the spring-loaded idler
arm shown in (Fig. 390).
Fig. 390 DSCN-0069a
9. Remove the existing belt.
A
C
D
E
F
G
B
2. Install the belt guide on the idler arm shown in (Fig.
391).
3. Using a 3/8” ratchet or breaker bar in the square
hole in the idler arm, install the idler spring (Fig.
391). Make sure the spring ends are seated in the
anchor grooves.