Service Manual

ENGINE
4-8 Toro Z Master G3 3000/5000/6000 Series Service Manual
4
A. Bolt C. Washer
B. Spring Washer (2)
Fig. 247 DSCN-0060a
10. Install the electric PTO clutch on the crankshaft,
make sure the slot on the clutch ts on the clutch
anchor. Using the bolt, spring washers, and washer
torque the clutch bolt to 55 ± 6 ft-lbs. (74.6 ± 8.1 Nm)
(Fig. 248).
Fig. 248 DSCN-0061a
9. Install the bolt, spring washers (with crown of the
washers facing the bolt head), and washer (Fig.
247).
A
B
C
7. Install the key to the engine crankshaft (Fig. 245).
Fig. 245 DSCN-0034a
8. Install the engine sheave on the crankshaft (Fig.
246).
Fig. 246 DSCN-0032a