Service Manual

HYDRAULIC SYSTEM

5-8 Toro Z Master G3 3000/5000/6000 Series Service Manual

35. Remove the 2 nuts from the bolts securing the UHT

to the cradle (Fig. 291).

Caution: The UHT weighs approximately 80 lbs.

(36.29kg).

Fig. 289 PICT-8619a

34. Lower the UHT/cradle assembly from the frame

by lowering the oor jack. Take care that the brake

cables and UHT fan are clear of the frame (Fig.

290).

Note: Ensure the control arm shaft clears the frame

and the control arm linkage doesn’t get

caught between the frame and the UHT as it is

being lowered.

Fig. 290 PICT-8620

Fig. 291 PICT-8623a

36. Remove the UHT from the cradle (Fig. 292).

Fig. 292 PICT-8624

33. On the side of the machine being serviced, remove

the 2 bolts securing the UHT to the frame (Fig. 289).