Service Manual

CHASSIS

3-22 Toro Z Master G3 3000/5000/6000 Series Service Manual

6. Release the brake cable retainer holding the brake

cable to the cradle. Push the cable through the

routing hole and remove (Fig. 079).

Fig. 079 PICT-8974a

7. Remove the tie strap securing the brake cable to the

cradle (Fig. 080).

Fig. 080 PICT-8977a

A. Right side brake C. Left side brake

assembly assembly

B. Cradle D. Retainer (5)

8. Remove the brake cable from the retainers located

on the cradle (Fig. 081).

Note: The cable is routed around the cradle.

Fig. 081 cables routing #4

9. Remove the cotter pin located on the clevis pin hold-

ing the cable clevis to the brake lever (Fig. 082).

Fig. 082 PICT-8999a