Operator's Manual
Table Of Contents
- NO TITLE
- NO TITLE
- NO TITLE
- Adding Fuel
- Checking the Engine-Oil Level
- Breaking in a New Machine
- Using the Rollover-Protection System (ROPS)
- Think Safety First
- Operating the Parking Brake
- Operating the Mower Blade-Control Switch (PTO)
- Operating the Throttle
- Operating the Ignition Switch
- Using the Fuel-Shutoff Valve
- Starting and Stopping the Engine
- Using the Safety-Interlock System
- Driving Forward or Backward
- Stopping the Machine
- Adjusting the Height-of-Cut
- Adjusting the Anti-Scalp Rollers
- Adjusting the Flow-Baffle-Cam Locks
- Positioning the Flow Baffle
- Positioning the Seat
- Using the Drive-Wheel Release Valves
- Using the Side Discharge
- Transporting the Machine
- Loading the Machine
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
ChangingtheEngineOil
ServiceInterval:Aftertherst8hours
Every100hours(moreoftenindirtyordusty
conditions).
Note:Disposeoftheusedoilatarecyclingcenter.
1.Starttheengineandletitrunfor5minutes.
Note:Thiswarmstheoilsothatitdrainsbetter.
2.Parkthemachinesothattherearisslightly
lowerthanthefronttoensurethattheoildrains
completely.
3.Disengagetheblade-controlswitch(PTO),move
themotion-controlleverstotheNEUTRAL-LOCK
position,andsettheparkingbrake.
4.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition(Figure47).
g008804
g027734
Figure47
5.Slowlypourapproximately80%ofthespecied
oilintothellertubeandslowlyaddthe
additionaloiltobringittotheFullmark(Figure
48).
g027660
Figure48
6.Starttheengineanddrivetoaatarea.
7.Checktheoillevelagain.
42