Operator's Manual

g008968
Figure83
BottomViewoftheMachine
1.Filterlocations
2.Hydrauliclter
6.Applyathincoatofhydraulicuidtotherubber
gasketonthereplacementlter(Figure83).
7.Installthereplacementhydrauliclter.
8.Installthepump-drivebeltandthemowerbelt.
9.Removethejackstandsandlowerthemachine
(Figure82).
10.Addoiltothehydraulicreservoirandcheckfor
anyleaks.
11.Cleanupanyspilleduid.
12.Starttheengineandletitrunforabout2minutes
topurgeairfromthesystem.
13.Shutofftheengineandcheckforleaks.
14.Checktheuidlevelwhiletheuidiscold.
15.Ifrequired,adduidtothehydraulicreservoir.
Note:Donotoverll.
MowerDeck
Maintenance
LevelingtheMowerDeck
SettinguptheMachine
Note:Ensurethemowerdeckislevelbefore
matchingtheheightofcut(HOC).
1.Movethemachinetoaatsurface.
2.Disengagetheblade-controlswitch(PTO),move
themotion-controlleverstotheNEUTRAL-LOCK
position,andsettheparkingbrake.
3.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
4.Checktirepressureofthetires.Ifneeded,
adjustthepressureto90kPa(13psi).
5.Positionthemowertothe76mm(3inch)
height-of-cutposition.
LevelingtheDeck
1.Movethemoweronaatsurface.
2.Shutofftheengine,waitforallmovingpartsto
stop,removekey,andengagetheparkingbrake.
3.Checkthetirepressureinthedrivetires.The
properinationpressurefortiresis90kPa(13
psi).Adjustthepressureifnecessary.
4.Positionthetransportlockinthelatching
position.
5.Pushthedeck-liftpedalallthewayforwardso
thatthedecklatchesatthe14cm(5-1/2inch)
transportposition(Figure84).
57