Service Manual

CHASSIS

3-21Toro Z Master G3 3000/5000/6000 Series Service Manual

Park Brake Cable Replacement (2011

& Prior)

Left Park Brake Cable Removal (2011 &

Prior)

1. Raise the rear end of the unit and install jack stands

under the tie down loops on the frame. Remove the

RH and LH wheels from the unit (Fig. 075).

Fig. 075 PICT-8962

2. Disengage the park brake lever.

3. Remove the two nuts located on the end of park

brake cable (Fig. 076).

Fig. 076 PICT-9075a

Fig. 077 PICT-8969a

5. Slide the brake cable out of the cable anchor and out

towards the front (Fig. 078).

Fig. 078 PICT-8970a

4. With needle nose pliers, squeeze the tabs on the

brake cable and pull the brake cable out of the slot in

the cable anchor (Fig. 077).