Operator's Manual
Table Of Contents
- NO TITLE
- NO TITLE
- NO TITLE
- Adding Fuel
- Checking the Engine-Oil Level
- Breaking in a New Machine
- Using the Rollover-Protection System (ROPS)
- Think Safety First
- Operating the Parking Brake
- Operating the Mower Blade-Control Switch (PTO)
- Operating the Throttle with Horizon™ Technology
- Operating the Ignition Switch
- Using the Fuel-Shutoff Valve
- Starting and Stopping the Engine
- Using the Safety-Interlock System
- Driving Forward or Backward
- Stopping the Machine
- Adjusting the Height-of-Cut
- Adjusting the Anti-Scalp Rollers
- Adjusting the Flow-Baffle-Cam Locks
- Positioning the Flow Baffle
- Positioning the Seat
- Unlatching the Seat
- Changing the Seat Suspension
- Using the Drive-Wheel Release Valves
- Using the Side Discharge
- Transporting the Machine
- Loading the Machine
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
5.Installthelefthydraulicunitshroud(Figure52).
CheckingtheSparkPlug
Important:Replacethesparkplug(s)whenit
has:ablackcoating,wornelectrodes,anoilylm,
cracksorreuseisquestionable.
Ifyouseelightbrownorgrayontheinsulator,the
engineisoperatingproperly.Ablackcoatingonthe
insulatorusuallymeanstheaircleanerisdirty.
Setthegapto0.76mm(0.030inches).
g027479
Figure54
InstallingtheSparkPlug
Tightenthesparkplug(s)to24.4to29.8N·m(18to
22ft-lb).
g027735
Figure55
CheckingtheSpark
Arrester
ForaModelwithaSparkArrester
ServiceInterval:Every50hours
WARNING
Hotexhaustsystemcomponentsmayignite
gasolinevaporsevenyoushutofftheengine.
Hotparticlesexhaustedduringengine
operationmayigniteammablematerials.
Firemayresultinpersonalinjuryorproperty
damage.
Donotrefuelorruntheengineunlessaspark
arresterisinstalled.
1.Stopengine,waitforallmovingpartstostop,
andremovekey.Engageparkingbrake.
2.Waitformufertocool.
3.Ifthereareanybreaksinthescreenorwelds,
replacethearrester.
4.Ifthescreenisplugged,removethearrester
andshakethelooseparticlesoutofthearrester
andcleanthescreenwithawirebrush(soakit
insolventifnecessary).Installthearresteron
theexhaustoutlet.
46