Service Manual

HYDRAULIC SYSTEM

5-26 Toro Z Master G3 3000/5000/6000 Series Service Manual

Fig. 346 DSCN-4325a

17. On the side of the machine not being serviced,

remove the three carriage bolts and nuts securing

the UHT transmission to the cradle (Fig. 348).

Fig. 348 DSCN-4518a

15. Pull the brake cable out of the cable anchor on the

transmission and slide it out of the slot (Fig. 346).

16. On the side of the machine being serviced, use a

wheel hub puller (Toro part number TOR6006) to

remove the wheel hub from the UHT wheel shaft

(Fig. 347).

Fig. 347 DSCN-4517a

18. On the side of the machine being serviced, remove

the bottom carriage bolt and nut securing the UHT

transmission to the cradle (Fig. 349).

Fig. 349 DSCN-4520a