Operator's Manual

Note:Toincreasetheheight,turntheadjustmentnut
clockwise;todecrease,turncounterclockwise.
Note:Ifthefrontdecklinksdonothaveenough
adjustmenttoachieveaccuratecutheight,the
singlepointadjustmentcanbeutilizedtogainmore
adjustment.
Figure92
1.Adjustmentnut3.Reardeckadjustment
2.Jamnut4.Frontdeckadjustment
12.Toadjustthesingle-pointsystem,loosenthe2boltsat
thebottomoftheheight-of-cutplate(Figure93).
Figure93
1.Boltsatthebottomoftheheight-of-cutplate
13.Ifthedeckistoolow ,tightenthesinglepoint
adjustmentboltbyrotatingitclockwise.Ifthedeckis
toohigh,loosenthesinglepointadjustmentboltby
rotatingitcounterclockwise(Figure94).
Note:Loosenortightenthesingle-pointadjustment
boltenoughtomovetheheight-of-cutplatemounting
boltsatleast1/3thelengthoftheavailabletravel
intheirslots.Thiswillregainsomeupanddown
adjustmentoneachofthe4decklinks.
14.Tightenthe2boltsatthebottomoftheheight-of-cut
plate(Figure94).
Note:Inmostconditions,thebackbladetipshould
beadjusted6.4mm(1/4inch)higherthanthefront.
g017036
Figure94
1.Single-pointadjustmentbolt
15.Torquethe2boltsto37to45N-m(27to33ft-lb).
16.Onbothsidesofthedeck,measurefromthelevel
surfacetothebacktipoftheblade(postionB)as
showninFigure90.
Note:Themeasurementshouldread8.3cm(3-1/4
inches)
17.Finetunethescrewadjusterbyturningittoget8.3
mm(3-1/4inches)height(Figure92).
Toincreasetheheight,turntheadjustmentnut
clockwise;todecrease,turncounterclockwise.
18.Measureuntilall4sidesarethecorrectheight.
19.Tightenallofthenutsonthedeck-lift-armassemblies.
20.Lowerthedischargechute.
60