Operator's Manual

g009030
Figure40
6.Removethedustcapandadjustthecaster
pivots,andkeepthedustcapoffuntilgreasing
isdone;refertoAdjustingtheCaster-Pivot
Bearing(page51).
7.Removethehexplugandthreadagreasetting
intothehole.
8.Pumpgreaseintothegreasettinguntilitoozes
outaroundthetopbearing.
9.Removethegreasettinginthehole.Installthe
hexpluganddustcap(Figure41).
g027339
Figure41
Lubricatingthe
Caster-WheelHubs
ServiceInterval:Yearly
1.Shutofftheengine,waitforallmovingpartsto
stop,removethekey,andengagetheparking
brake.
g006115
Figure42
1.Sealguard2.Spacernutwithwrench
ats
2.Raisethemowerforaccess.
3.Removethecasterwheelfromthecasterforks.
4.Removethesealguardsfromthewheelhub.
5.Removeaspacernutfromtheaxleassemblyin
thecasterwheel.
Note:Thread-lockingadhesivehasbeen
appliedtolockthespacernutstotheaxle.
6.Removetheaxle(withtheotherspacernutstill
assembledtoit)fromthewheelassembly.
7.Pryoutsealsandinspectbearingsforwearor
damageandreplaceifnecessary.
8.Packthebearingswithageneral-purpose
grease.
9.Insert1bearingand1newsealintothewheel.
Note:Replacetheseals.
10.Iftheaxleassemblyismissingbothspacernuts,
applyathread-lockingadhesiveto1spacernut
andthreaditontotheaxlewiththewrenchats
facingoutward.
Note:Donotthreadthespacernutallof
thewayontotheendoftheaxle.Leave
approximately3mm(1/8inch)fromtheouter
surfaceofthespacernuttotheendoftheaxle
insidethenut.
11.Inserttheassemblednutandaxleintothewheel
onthesideofthewheelwiththenewsealand
bearing.
36