Operator's Manual

3.Tightenjamnut.
g008621
Figure86
1.Flangednut2.Jamnut
HydraulicSystem
Maintenance
ServicingtheHydraulic
System
HydraulicFluidType:T oro
®
HYPR-OIL
™
500
hydraulicoilorMobil
®
115W-50.
Important:Usethehydraulicuidspecied.
Otheruidscoulddamagethehydraulicsystem.
EachHydraulicSystemOilCapacity:1.5L(52oz)
persidewithlterchange
CheckingtheHydraulicFluid
ServiceInterval:Every50hours—Checkthe
hydraulic-uidlevel.
1.Positionthemachineonalevelsurface.
2.Disengagetheblade-controlswitch(PTO),move
themotion-controlleverstotheNEUTRAL-LOCK
position,andsettheparkingbrake.
3.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
4.Allowtheengineandhydraulicsystemtocool
for10minutes.
Note:Theuidlevelonthedipstickisincorrect
ifyouchecktheuidwhenthemachineishot.
5.Movetheseatforward.
6.Cleantheareaaroundthedipsticksofhydraulic
systemreservoirs(Figure87).
7.Remove1dipstickfromthehydraulicreservoir
(Figure87).
8.Wipethedipstickoffandthreadthedipstickinto
thereservoir.
9.Removethedipstickandlookattheend(Figure
87).IftheuidlevelisattheADDmark,
slowlypouronlyenoughuidintothehydraulic
reservoirtoraisetheleveltotheFULLorHline.
Important:Donotoverllthehydraulic
unitswithuidasdamagemayoccur.Do
notrunthemachinewiththeuidbelowthe
addmark.
10.Installthedipstick.
11.Repeatprocedurefortheoppositedipstick.
60