Service Manual

CHASSIS

3-53Toro Z Master G3 3000/5000/6000 Series Service Manual

Adjusting the Motion Control Neutral

Lock Pivot

1. Loosen the jam nut.

2. Tighten or loosen the anged nut to the desired feel.

For more resistance, tighten the ange nut. For less

resistance, loosen the ange nut.

3. Tighten jam nut.

A. Flanged nut B. Jam nut

Note: The anged nut can be adjusted to obtain a

more desired motion control lever resistance

when moving it to the neutral lock position.

See Figure 188 for adjustment options.

Fig. 188 g. 88 G008621

Adjusting the Control Handle

Position

A. Bolt C. Control lever

B. Handle D. Nut

Fig. 189 g. 84 G009040

Note: There are two height positions for the control

levers; high and low. Remove the bolts to

adjust the height for the operator.

1. Disengage the PTO, move the motion control levers

to the neutral locked position, and set the parking

brake.

2. Stop the engine, remove the key, and wait for all

moving parts to stop before leaving the operating

position.

3. Loosen the bolts and ange nuts installed (Fig. 189).