Service Manual

MOWER DECKS

6-13Toro Z Master G3 3000/5000/6000 Series Service Manual

4. Pack the bearing with No. 2 grease and install the

bearing (Fig. 420).

6. Using a seal driver, drive or press the seal on the

lower end of the spindle housing until the seal is

ush with the outer edge of the housing (Fig. 422).

5. Install the lower seal (Fig. 421).

Note: The open lip of the seal should be facing

outward.

Fig. 419 DSCN-2690a

Fig. 420 DSCN-2691a

Fig. 421 DSCN-2692a

Fig. 422 DSCN-2693a

3. Turn the spindle housing over and install the lower

bearing race into the spindle housing (Fig. 419).

Note: The wider inside diameter of the bearing race

should be facing up to accept the tapered

bearing.