Service Manual

HY13-1512-006-M1/USA
Torqmotor™ Service Procedure
TC, TS, TB, TE, TJ, TF, TG, TH and TL Series
Parker Hannifi n Corporation
Hydraulic Pump/Motor Division
Greeneville, TN 37745 US
55
The items described in this document and other documents or descriptions provided by Parker Hannifi n Corporation, its subsidiaries and its authorized
distributors are hereby offered for sale at prices to be established by Parker Hannifi n Corporation, its subsidiaries and its authorized distributors.
This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any such
items, when communicated to Parker Hannifi n Corporation, its subsidiary or an authorized distributor (“Seller”) verbally or in writing, shall constitute
acceptance of this offer.
by Buyer. Unless otherwise agreed, Seller shall have the right to alter,
discard or otherwise dispose of any special tooling or other property in
its sole discretion at any time.
8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,
confi dential information or equipment furnished by Buyer or any other
items which become Buyer’s property, may be considered obsolete and
may be destroyed by Seller after two (2) consecutive years have elapsed
without Buyer placing an order for the items which are manufactured using
such property, Seller shall not be responsible for any loss or damage to
such property while it is in Seller’s possession or control.
9. Taxes: Unless otherwise indicated on the face hereof, all prices and
charges are exclusive of excise, sales, use, property, occupational or like
taxes which may be imposed by any taxing authority upon the manufac-
ture, sale or delivery of the items sold hereunder. If any such taxes must
be paid by Seller or if Seller is liable for the collection of such tax, the
amount thereof shall be in addition to the amounts for the items sold. Buyer
agrees to pay all such taxes or to reimburse Seller therefore upon receipt
of its invoice. If Buyer claims exemption from any sales, use or other tax
imposed by any taxing authority, Buyer shall save Seller harmless from
and against any such tax, together with any interest or penalties thereon
which may be assessed if the items are held to be taxable.
10. Indemnity For Infringement of Intellectual Property Rights: Seller
shall have no liability for infringement of any patents, trademarks, copy-
rights, trade dress, trade secrets or similar rights except as provided in
this Part 10. Seller will defend and indemnify Buyer against allegations of
infringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress
and trade secrets (hereinafter ‘Intellectual Property Rights’). Seller will
defend at its expense and will pay the cost of any settlement or damages
awarded in an action brought against Buyer based on an allegation that
an item sold pursuant to this contract infringes the Intellectual Property
Rights of a third party. Seller’s obligation to defend and indemnify Buyer
is contingent on Buyer notifying Seller within ten (10) days after Buyer
becomes aware of such allegations of infringement, and Seller having
sole control over the defense of any allegations or actions including all
negotiations for settlement or compromise. If an item sold hereunder is
subject to a claim that it infringes the Intellectual Property Rights of a
third party, Seller may, at its sole expense and option, procure for Buyer
the right to continue using said item, replace or modify said item so as to
make it noninfringing, or offer to accept return of said item and return the
purchase price less a reasonable allowance for depreciation. Notwithstand-
ing the foregoing, Seller shall have no liability for claims of infringement
based on information provided by Buyer, or directed to items delivered
hereunder for which the designs are specifi ed in whole or part by Buyer,
or infringements resulting from the modifi cation, combination or use in a
system of any item sold hereunder. The foregoing provisions of this Part
10 shall constitute Seller’s sole and exclusive liability and Buyer’s sole and
exclusive remedy for infringement of Intellectual Property Rights.
If a claim is based on information provided by Buyer or if the design for an
item delivered hereunder is specifi ed in whole or in part by Buyer, Buyer
shall defend and indemnify Seller for all costs, expenses or judgments
resulting from any claim that such item infringes any patent, trademark,
copyright, trade dress, trade secret or any similar right.
11. Force Majeure: Seller does not assume the risk of and shall not be
liable for delay or failure to perform any of Seller’s obligations by reason
of circumstances beyond the reasonable control of Seller (hereinafter
‘Events of Force Majeure’). Events of Force Majeure shall include without
limitation, accidents, acts of God, strikes or labor disputes, acts, laws,
rules or regulations of any government or government agency, fi res,
fl oods, delays or failures in delivery of carriers or suppliers, shortages of
materials and any other cause beyond Seller’s control.
12. Entire Agreement/Governing Law: The terms and conditions set
forth herein, together with any amendments, modifi cations and any dif-
ferent terms or conditions expressly accepted by Seller in writing, shall
constitute the entire Agreement concerning the items sold, and there are
no oral or other representations or agreements which pertain thereto.
This Agreement shall be governed in all respects by the law of the State
of Ohio. No actions arising out of the sale of the items sold hereunder or
this Agreement may be brought by either party more than two (2) years
after the cause of action accrues.
9/91-P
1. Terms and Conditions of Sale: All descriptions, quotations, pro-
posals, offers, acknowledgments, acceptances and sales of Seller’s
products are subject to and shall be governed exclusively by the terms
and conditions stated herein. Buyer’s acceptance of any offer to sell is
limited to these terms and conditions. Any terms or conditions in addi-
tion to, or inconsistent with those stated herein, proposed by Buyer in
any acceptance of an offer by Seller, are hereby objected to. No such
additional, different or inconsistent terms and conditions shall become
part of the contract between Buyer and Seller unless expressly accepted
in writing by Seller. Seller’s acceptance of any offer to purchase by Buyer
is expressly conditional upon Buyer’s assent to all the terms and condi-
tions stated herein, including any terms in addition to, or inconsistent
with those contained in Buyer’s offer, Acceptance of Seller’s products
shall in all events constitute such assent.
2. Payment: Payment shall be made by Buyer net 30 days from the
date of delivery of the items purchased hereunder. Amounts not timely
paid shall bear interest at the maximum rate permitted by law for each
month or portion thereof that the Buyer is late in making payment. Any
claims by Buyer for omissions or shortages in a shipment shall be waived
unless Seller receives notice thereof within 30 days after Buyer’s receipt
of the shipment.
3. Delivery: Unless otherwise provided on the face hereof, delivery shall
be made F.O.B. Seller’s plant. Regardless of the method of delivery,
however, risk of loss shall pass to Buyer upon Seller’s delivery to a carrier.
Any delivery dates shown are approximate only and Seller shall have no
liability for any delays in delivery.
4. Warranty: Seller warrants that the items sold hereunder shall be free
from defects in material or workmanship for a period of 18 months from
date of shipment from Parker Hannifi n Corporation. THIS WARRANTY
COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING
TO ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER
WARRANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND
WHATSOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT
LIMITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE,
WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OF
LAW, TRADE USAGE, OR COURSE OF DEALING ARE HEREBY
DISCLAIMED.
NOTWITHSTANDING THE FOREGOING, THERE ARE NO WAR-
RANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY
OR PARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS.
5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR IN
ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT
SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT
OF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID
BY BUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL
SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER,
INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM
OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS
SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH
OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT,
INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO
WARN OR STRICT LIABILITY.
6. Changes, Reschedules and Cancellations: Buyer may request to
modify the designs or specifi cations for the items sold hereunder as well
as the quantities and delivery dates thereof, or may request to cancel
all or part of this order, however, no such requested modifi cation or
cancellation shall become part of the contract between Buyer and Seller
unless accepted by Seller in a written amendment to this Agreement.
Acceptance of any such requested modifi cation or cancellation shall
be at Seller’s discretion, and shall be upon such terms and conditions
as Seller may require.
7. Special Tooling: A tooling charge may be imposed for any special
tooling, including without limitation, dies, fi xtures, molds and patterns,
acquired to manufacture items sold pursuant to this contract. Such special
tooling shall be and remain Seller’s property notwithstanding payment
of any charges by Buyer. In no event will Buyer acquire any interest in
apparatus belonging to Seller which is utilized in the manufacture of the
items sold hereunder, even if such apparatus has been specially converted
or adapted for such manufacture and notwithstanding any charges paid
Offer of Sale