Service Manual

ELECTRICAL

7-5Toro Z Master G3 3000/5000/6000 Series Service Manual

IgnitionSwitch

Purpose

The ignition switch makes the proper connections for the

starter, accessories, and safety circuits.

Location

The ignition switch is located on the control panel, on the

right fender (Fig. 490).

Fig.490 DSCN-0142a

HowItWorks

Detents inside the switch give it 3 positions: OFF, RUN,

and START. The START position is spring loaded so the

key automatically returns to RUN when released (Fig.

491).

IgnitionSwitchWiringConnections

B - Battery voltage “In”

S - Starting Circuit

I - Fuel sender & Start Relay

A - Accessories

R - Regulator

Testing

1. Disconnect the switch from the wiring harness.

2. Verify that continuity exists between the terminals

listed for the switch position.

3. Verify there is NO continuity between terminals not

listed for the position.

OFF No continuity between terminals

RUN Continuity – B R I A

START Continuity – B R I S

Fig.491 DSCN-0173a